アンプゲインの選択スイッチ



ターミネ−ション静電容量の選択スイッチ   カートリッジ・ロードインピーダンスの選択スイッチ



バッファー・ボリュームコントロール  ライン入力選択






                      2段階RF 干渉分路   独立したバッファー固定と可変出力

分離方式接地とアースグランド・ポイント              


SPECIFICATIONS

Vacuum tube compliment: 6922 x 2 (gain) plus 7044 x 4 (output buffers)
Fuse type and ratings: 100 VAC: 2 Amp. MDL slow-blow main
117 VAC: 1.5 Amp MDL slow-blow main
234 VAC: 0.75 Amp MDL slow-blow main
Moving Magnet input impedance: 5-step user adjustable via fixed low-noise resistors.
25, 50, 100, 200 and 47000 ohms.
Moving Coil input impedance: 5-step user adjustable via multi-tap autoformer:
25, 50, 100, 200 and 400 ohms.
Input Termination Capacitance: Variable in 10 picofarad steps from 10 to 1100 pF.
(1.1 nF). Residual input capacitance less than 40 pF.
Gain Steps: 4-step user adjustable, 50, 55, 60 and 65 dB active gain at 1 kHz referred to FIXED
output jack, 10 k-ohm load. Additional gain available via MC step-up autoformer.
Deviation from RIAA curve: Less than +0.5 / -0.3 dB from 20 Hz to 20 kHz, any gain setting.
Typically less than +/- 1 dB from 10 Hz to 100 kHz
Inter-channel differential phase: Less than 4 degrees from 20 Hz to 20 kHz, any gain setting.
Typically less than 2 degrees.
Inter-channel differential gain: Less than +/- 0.5 dB from 20 Hz to 20 kHz, any gain setting.
Dynamic Range:101 dB @ 1 kHz, 1% THD200 ohm source, 47 k-ohm input, @55dB Gain97 dB @ 1 kHz, 0.1% THD
Maximum Output: +27dBm @ 1KHz with 3% THD into 100Kohm load
FIXed Output impedance: 150 ohms. Minimum suggested load greater than 1500 ohms.
VARIable Output impedance: 75 ohms. Minimum suggested load greater than 600 ohms.







試聴環境